Maximising 1KD Performance with the PKS 44mm Turbo

Maximising 1KD Performance with the PKS 44mm Turbo

What is the PKS 44mm Turbo and How Does it Work?

The PKS 44mm Turbo is a high-performance turbocharger designed to maximize the power and efficiency of your engine. It is specifically engineered for use in high-performance vehicles and it is known for its exceptional performance and durability.

With its advanced design and cutting-edge technology, the PKS 44mm Turbo is able to deliver a significant increase in horsepower and torque, allowing you to experience a thrilling and exhilarating driving experience.

Why is the PKS 44mm Turbo the Best Choice for 1KD Performance Enthusiasts?

There are several reasons why the PKS 44mm Turbo is the best choice for 1KD performance enthusiasts:

Ā 

  • Unmatched Power: The PKS 44mm Turbo is designed to deliver unmatched power and performance for its size. With its advanced compressor wheel and turbine design, it is able to generate higher boost levels and produce more power than other equivalent turbochargers on the market. It is recommended to install +30% injectors at a minimum to fully utilise the increase in air mass provided from this turbo.

Ā 

  • Enhanced Efficiency: The PKS 44mm Turbo is engineered to maximize the efficiency of your engine. It is designed to deliver a higher volume of air to the engine, allowing for better combustion and improved fuel efficiency.

Ā 

  • Durability: The PKS 44mm Turbo is built to last. It is constructed with high-quality materials and undergoes rigorous testing to ensure its durability and reliability. Whether you're hitting the tracks or pushing your car to the limit on the street, you can trust the PKS 44mm Turbo to perform flawlessly.

Ā 

How to Install the PKS 44mm Turbo

Installing the PKS 44mm Turbo is a straightforward process. If you have purchased the 1KD PKS 44mm low mount kit - Here are the general steps to install the PKS 44mm Turbo:

    1. Begin by disconnecting the negative terminal of the battery to ensure safety.
    2. Remove the existing turbocharger from your vehicle, taking care to disconnect any hoses or electrical connections.
    3. Oil the new turbo by using a funnel and a high quality oil or turbo break in lubricant and turning the turbo for approximately 1 to 2 minutes until oil flows out the oil return line.
    4. Install the PKS 44mm Turbo in the same location as the previous turbocharger, making sure to connect all hoses and lines provided
    5. Check fittings are securely tightened.
    6. Install the dump pipe provided with the kit
    7. Double-check all connections and ensure that everything is properly tightened.
    8. Mount the actuator off the VN turbo and mount it securely (this can be tuned out and removed at a later stage)
    9. Reconnect the negative terminal of the battery.
    10. Start your engine and check for any leaks or abnormal noises.

Conclusion

The Common Rail Cowboys PKS 44mm Turbo Kit is the ultimate choice for performance enthusiasts looking to maximize the power and efficiency of their 1KD. With its unmatched power, enhanced efficiency, and exceptional durability, it is the perfect turbocharger for those who demand the best.

By installing the PKS 44mm Turbo, you can take your driving experience to the next level and enjoy the thrill of increased horsepower and torque. So why wait? Upgrade your vehicle with the PKS 44mm Turbo and experience the difference for yourself!

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.