Skip to product information
1 of 1

Common Rail Cowboys

1KD Prado +30 Nozzle Upgrade Set

1KD Prado +30 Nozzle Upgrade Set

Regular price $913.00 NZD
Regular price $972.00 NZD Sale price $913.00 NZD
Sale Sold out
Tax included in Australia, Shipping calculated at checkout.

1KD Prado +30% Nozzle Upgrade Set

 

Set of 4x Genuine Denso +30% Injector Nozzles to suit your Prado.

 

These Genuine Denso +30% Upgraded Nozzles can improve Torque and Power and reduce smoke in your Prado* - by reducing the required injector pulse width and allowing a greater amount of fuel to be injected in the correct timeframe to produce an optimal burn and optimal mechanical leverage of the piston on the power stroke.

These nozzles are a direct replacement for the standard Denso injectors (no other modifications required - Only Tuning Required).

 

Please Leave your Rego number and state or VIN and Year Model in the Notes Section at checkout.

 

Free Insured Express Postage Australia Wide 

Afterpay, Humm and Zip Available

 

Included with each set of nozzles is 4x Genuine Seats and O-Rings to ensure there's a perfect seal when installed.

 

Installation requires specific tools and skills, and it is recommended to be carried out by a Qualified Diesel Repair Shop.

 

However, installation is generally not an extremely complex job and may be carried out at home.

 

Minimum recommended tools required include:

  • Air Compressor
  • Air Blower Attachment
  • 1/4" or 1/2" Socket Sets
  • 1/4" and 1/2" Torque Wrench (must be accurate)
  • 1/2" 300mm Breaker Bar
  • Various length Extensions to suit your socket sets
  • 1/2" 17mm Crows Foot 
  • 1/2" 14mm Single Hex Deep Socket
  • Spanner Set
  • Stumpy Spanner Set
  • Bench Vice
  • YouTube
  • Scan Tool with Injector Learn Functions

Or

  • MVCI Cable / Tactrix Adapter with suitable cable and Techstream Software


Additional Products likely required:

  • Brake and Parts Cleaner
  • Quality Motor Oil
  • Grease
  • Lint Free Micro-Fibre Cloths
  • Rags
  • Cold Beers
  • 16mm Timber Dowel (used for cleaning injector seating surface on cylinder head)
  • 1KD Genuine Parts Injector Fitting Kit

 

Installation time is roughly 2-5 hours - skill and experience level dependant.

 

Note*:

 

Injectors recommended to be bench tested + shimmed to suit.

Tuning required 🤠

 

If you have any other Questions about this product or Questions during installation - We are happy to provide assistance Via the Store Chat Facility

 

View full details