Toyota
Genuine Rear Main Seal + Flywheel Housing Dust Seal | 1KD-FTV, 1GD-FTV | 90311-95008, 11354-30010
Genuine Rear Main Seal + Flywheel Housing Dust Seal | 1KD-FTV, 1GD-FTV | 90311-95008, 11354-30010
Taxes excluded. Shipping calculated at checkout.
Couldn't load pickup availability
Share
Genuine Toyota Rear Main Seal and Flywheel Housing Dust Seal
1KD-FTV and 1GD-FTV | Hilux, Prado, Fortuner | 90311-95008 + 11354-30010
The two seals you need when the gearbox is out of a 1KD or 1GD: the genuine Toyota rear crankshaft oil seal 90311-95008 and the flywheel housing dust seal 11354-30010. Both are single-use parts and both get replaced together. Genuine NOK-made Viton seal with the correct lip profile and directional pattern for the Toyota crank, which is the difference between a fix and a comeback.
Fitment
| Vehicle | Chassis | Engine | Build dates |
|---|---|---|---|
| Toyota Hilux N70 | KUN16 / KUN26 | 1KD-FTV 3.0L | 2005 to 2015 |
| Toyota Hilux N80 | GUN122 / 123 / 125 / 126 / 135 / 136 | 1GD-FTV 2.8L | 2015 on |
| Toyota LandCruiser Prado 120 | KDJ120 | 1KD-FTV 3.0L | 11/2006 to 10/2009 |
| Toyota LandCruiser Prado 150 | KDJ150 / GDJ150 | 1KD-FTV 3.0L, 1GD-FTV 2.8L | 2009 on |
| Toyota Fortuner | GUN156 | 1GD-FTV 2.8L | 2015 on |
The 90311-95008 rear main seal is also fitted to the 2KD-FTV, 1KZ-TE and 1HZ / 1HD families. Not sure? Add your VIN or State and Rego to the order notes and we will confirm before dispatch.
Part Numbers
| Rear crankshaft oil seal | 90311-95008 95 x 115 x 9.5 mm. Supersedes 90311-95005, 90311-95014, 90311-95015, 90311-95061, 90311-95091, 90080-31100 |
| Flywheel housing dust seal | 11354-30010 |
| Supplied as | 1 x rear main seal and 1 x dust seal, brand new, genuine Toyota |
Rear Main Still Leaking After a New Seal?
If the seal has been done before and it still weeps, the crank sealing surface is probably grooved. A new seal cannot seal against a groove. Fit our 1KD Rear Main Seal Repair Sleeve with this seal kit and it is fixed for the life of the engine.
Pro tip: run a fingernail across the crank where the seal lip rides. If it catches, sleeve it. Do not gamble a gearbox-out job on a seal alone.
Fitting Notes
- Gearbox and flywheel out. Remove the old seal without scoring the crank or the retainer bore.
- Clean the bore and crank surface. Inspect for a wear groove before fitting.
- Lightly oil the seal lip, press the seal in square to the correct depth with a proper driver, never a screwdriver.
- Fit the new dust seal to the flywheel housing.
- Check crankcase ventilation while you are there. A blocked breather or a tired PCV pushes oil past any rear main.
- Installation by a qualified technician recommended.
Shipping and Payment
- Free express shipping Australia wide. Full tracking included.
- Buy now, pay later. Afterpay, Humm, Klarna and Zip.
- International shipping available. Message us for a quote.
Frequently Asked Questions
Q: Is this genuine Toyota?
A: Yes. Both seals are genuine Toyota parts, new in Toyota packaging.
Q: Does the 1GD use the same rear main seal as the 1KD?
A: Yes. Toyota lists 90311-95008 for both the 1KD-FTV and the 1GD-FTV, as well as the 2KD and older 1KZ and 1H engines.
Q: Why include the dust seal?
A: It sits in the flywheel housing and is a one-use part. It costs a few dollars and saves a second gearbox-out job when it lets dirt in.
Q: My seal has been replaced and still leaks.
A: The crank is almost certainly grooved. Fit the repair sleeve with this kit.
Q: Can I do this in the driveway?
A: Gearbox and flywheel have to come out. Doable at home with the right gear, but it is a big job to get wrong.
Genuine Seals. Do the Job Once.
Rear main and dust seal for the 1KD and 1GD Hilux, Prado and Fortuner. Free express shipping Australia wide.
Disclaimer: Common Rail Cowboys is not affiliated with Toyota Motor Corporation. Fitment verification is the buyer's responsibility.