• Replaces all 14 rocker cover fasteners. Direct replacement for the factory 1KD hardware.
• Stainless bolts with a gold finish. Corrosion resistant underneath, gold on the outside. They are not gold plated titanium and we are not going to pretend otherwise.
• Anodised alloy washers. Durable colour accent, multiple colours available on this page.
• Direct fit. Sized for the 1KD rocker cover bolt locations.
• Cosmetic. No power, no efficiency, no change to how it drives.

• Toyota Hilux N70 (KUN26). 1KD-FTV, 2005 to 2015.
• Toyota LandCruiser Prado 120. 1KD-FTV, 2003 to 2009.
• Toyota LandCruiser Prado 150. 1KD-FTV, 2009 to 2015.
• Other 1KD-FTV vehicles. Should suit, but verify the fastener count and pattern on your cover first.

Confirm any non-OE cover before ordering. This set matches the OE fastener count and pattern for the 1KD rocker cover. If an aftermarket cover has already been fitted, count the bolt holes and check the thread before you buy, or send us a photo and we will confirm it.

• 14 x HPD stainless bolts. Gold finish.
• 14 x HPD anodised washers. Colour of your choice, selected on this page.

Quantities match the OE fastener count for the 1KD rocker cover. Minor shade variation between anodising batches is normal.

• This listing: gold. Warm finish, works well against a black or raw alloy cover.
• Ti burnt blue. Same 14 bolts and 14 washers with a burnt blue titanium look. Use the 1KD HPD Rocker Cover Bolt Set, Ti Burnt Blue.
• Plain stainless. The understated option. Use the 1KD HPD Stainless Bolt and Washer Set.
• All three suit the same cover. Finish is the only difference between them.
• Fitting a cover too? See the 1KD Alloy Rocker Cover.

• Replace one fastener at a time to keep the cover aligned.
• Plastic covers get torqued to factory specification. Over-torquing distorts the cover or crushes the grommets, and then it leaks.
• Alloy covers get tightened by feel only. Do not put a torque wrench on them.
• Inspect and replace the gasket and rubber seals if they are worn.
• Clean with mild soap and water. Avoid harsh solvents and abrasives, they will strip the finish.

• Free express shipping Australia-wide.
• Dispatch: in stock orders placed before 2 PM AEST on a business day go out the same day.
• Buy now, pay later: Afterpay, Humm, Klarna and Zip.

Cosmetic hardware. It will not add power and it will not cure an oil leak. A weeping cover is a gasket and grommet job, not a bolt job.

Confirm your cover is standard 1KD before ordering, and pick your washer colour carefully. Returns need the parts unused and in the original packaging.

Q: How many bolts do I get?

A: 14 bolts and 14 washers, matching the OE fastener count for the 1KD rocker cover.

Q: Will this fit all the 1KD Hilux and Prado models listed?

A: Yes. It is sized for the 1KD-FTV rocker cover used on the Hilux N70 and the Prado 120 and 150. Check first if a non-OE cover has been fitted.

Q: Are the bolts stainless with a gold finish, or actual titanium?

A: Stainless steel with a gold aesthetic finish, paired with coloured anodised washers. Not titanium.

Q: Do the washers come in different colours?

A: Yes, choose your preferred anodised colour on this page. Minor shade variation between batches is normal.

Q: Do I need to replace the rocker cover gasket at the same time?

A: Not mandatory, but it is smart to inspect the gasket and grommets and replace them if they are leaking or hardened.

Q: What torque should I use?

A: The factory 1KD rocker cover specification on a plastic cover. Over-torquing distorts the cover or crushes the grommets. On an alloy cover, tighten by feel.

Q: Will these add power?

A: No. They are gold bolts. They look good and they do not rust.