• Denso N80 Hilux 1GD-FTV fuel injectors for 2015-2020 models, showing a close-up of the Denso 295700-0550 injectors.
1 1

Denso

GDJ150 Prado Injectors - 1GD-FTV - Denso 295700-0550 - (2015-2020)

GDJ150 Prado Injectors - 1GD-FTV - Denso 295700-0550 - (2015-2020)

$3,450.50 AUD
$3,450.50 AUD
Sale Sold out

Taxes included. Shipping calculated at checkout.

Normally Ships in 0-2 Business Days
Fitment Check

Provide rego & state, a VIN, or tick the confirmation box to proceed.


GDJ150 Prado Injectors – 1GD-FTV

Denso 295700-0550 | 2.8L GD Diesel (2015–2020)

Genuine Denso OEM Fitment Stock Replacement Free Express Shipping AU

Restore Factory Performance in Your GDJ150 Prado 💪

Replace worn or failing injectors in your Toyota GDJ150 Prado with this set of Genuine Denso injectors, designed to suit the 1GD-FTV 2.8L common-rail diesel engine used in Prado models from 2015 to 2020.

Fresh injectors restore correct fuel delivery, smooth idle, clean combustion and reliable cold starts — especially important on higher-kilometre touring and towing vehicles.

This kit includes 4 × brand-new 1GD-FTV injectors, ready for professional installation.

🧩 Product Overview

Direct-fit OEM-spec Denso injectors designed specifically for the Toyota 1GD-FTV fuel system. Ideal for stock vehicles, daily drivers, touring builds and long-range Prados where reliability is critical.

📦 What’s Included
  • ✅ 4 × Genuine Denso 1GD-FTV Injectors
  • ✅ 4 × Genuine Denso Injector Seat Washers (PN Equivalent: 11176-33010)
  • ✅ Free Express Shipping Australia-Wide
  • ✅ Pay Later Options: Afterpay, Klarna, Zip, Humm
🧾 Injector Part Numbers
Denso – Primary Part Number
  • 295700-0550
Denso – Alternative / Superseded Numbers
  • 295700-0160
  • 295700-0150
  • 295700-0520
Toyota OEM Part Numbers
  • 23670-0E010
  • 23670-09420
  • 23670-11010
  • 23670-19015
  • 236700E010
  • 2367009420
  • 2367011010
  • 2367019015
🔍 Identifying the Correct 1GD Injector

These injectors can be identified by the injector compensation code engraved on the top of the injector body.

For this injector family, the compensation code starts with the digits “72”.

  • The compensation code must be entered into the ECU after installation
  • It is critical for correct fueling and smooth engine operation
  • Always match injector type and code format before replacement
Tip: If your existing injector codes begin with 72, this injector type is typically the correct match for your engine.
🔧 Fitment & Compatibility

Toyota Prado GDJ150 – 2.8L 1GD-FTV
Build dates: 06/2015 – 09/2020

Fitment Note: Toyota made running changes across model years. VIN or part-number confirmation is strongly recommended before ordering.
🛠️ Installation Notes
  • Professional installation strongly recommended
  • Injector compensation coding required after installation
  • Follow factory cleanliness and torque procedures
  • Confirm fuel system health before fitting new injectors
💳 Payment & 🚚 Shipping
  • Afterpay, Klarna, Zip & Humm available
  • Free Express Shipping Australia-Wide
  • Fast dispatch on stocked items

❓ Frequently Asked Questions

Are these genuine Denso injectors?

Yes. These are brand-new genuine Denso injectors supplied in sealed Denso packaging with correct labelling and serials.

Do these injectors require coding?

Yes. Injector compensation values must be entered into the ECU using a compatible diagnostic scan tool after installation.

What symptoms indicate worn injectors?

Hard starting, rough idle, excessive fuel corrections, diesel knock, poor throttle response or increased fuel consumption.

Will these suit tuned vehicles?

These are OEM-flow injectors. Higher-power or heavily tuned vehicles may require increased-flow injector options depending on power goals.

Common Rail Cowboys is not affiliated with Toyota Motor Corporation. Vehicle fitment and compliance remain the buyer’s responsibility.

View full details