FuseTech
4JJ1 Stroker Pump - New Denso Pump (Upgraded)
4JJ1 Stroker Pump - New Denso Pump (Upgraded)
Taxes excluded. Shipping calculated at checkout.
Complete the install
Couldn't load pickup availability
Share
New Denso HP3 | 4.7mm FuseTech Stroker Shaft | Built For 450+ RWHP | Isuzu 4JJ1 Pre-DPF
A brand new Denso HP3 (294000-1400) fitted with a 4.7mm FuseTech stroker shaft. Not a reman, not a core swap: new pump body, new components, upgraded shaft. Built to deliver the fuel volume a 450+ RWHP 4JJ1 needs with supporting mods and appropriate tuning.
For high-boost, big-turbo, compound and race setups where the factory HP3 falls over. Direct replacement for the factory pump.
What Is Included
- New Denso HP3 pump body, Denso part number 294000-1400
- Upgraded 4.7mm FuseTech stroker shaft installed
- New components throughout
Vehicle Fitment
- Holden Colorado RC 2008: 4JJ1
- Isuzu D-MAX 2007 to 2016: 4JJ1 (pre-DPF)
- Isuzu MU-X 2012 to 2016: 4JJ1 (pre-DPF)
Suits most common rail 4JJ1 HP3 systems (pre-DPF). Leave your rego and state or VIN at checkout if you want it confirmed.
Power and Boost
- Built for 450+ RWHP builds. Typical results 400 to 450 RWHP depending on injectors, turbo size and tuning
- Increased plunger stroke means higher fuel delivery
- Maintains rail pressure under high boost
- Suits big turbo and compound builds
Fitting Notes
- Direct replacement for the factory HP3 pump
- A custom tune is required to take advantage of the increased fuel volume
- Professional installation recommended
Intended Use
This pump is built for racing and competition: 4JJ1s running big turbos, compounds and race tunes, where the whole fuel system is working well beyond what it was originally designed for.
At that level, how long a pump lives comes down to the tune, the injectors, fuel quality and how hard the engine is used, and those are out of our hands once it leaves us. So it is sold for racing and competition use only, with no warranty beyond your rights under the Australian Consumer Law. Our refund policy sets out how racing and competition use is treated.
Not sure it suits your build? Text us before you order and we will talk it through.
Supporting Hardware
- 4JJ1 +30% / +50% modified injectors (2007 to 2012, 095000-6980)
- 4JJ1 SCV upgrade kit
- HP3 2-rotor seal kit
Shipping and Payment
- Free express shipping Australia-wide
- Afterpay, Humm, Klarna and Zip available at checkout
- Fast dispatch on in-stock units
Frequently Asked Questions
What power can this support?
Built for 450+ RWHP builds. Typically 400 to 450 RWHP depending on injectors, turbo size and tuning.
Is tuning required?
Yes. A custom tune is required to take advantage of the increased fuel volume.
Will this fit all 4JJ1 models?
Most common rail 4JJ1 HP3 systems, pre-DPF.
Is this brand new?
Yes. New Denso HP3 pump with upgraded internals.
Does it come with a warranty?
It is sold for racing and competition use only, so there is no warranty beyond your rights under the Australian Consumer Law. See our refund policy for how racing and competition use is treated.
New Pump. 4.7mm Shaft. Built For 450+.
The fuel volume a big-turbo or compound 4JJ1 needs, in a brand new Denso body. Free express shipping Australia-wide.
Common Rail Cowboys is not affiliated with Isuzu, Holden, Denso or FuseTech. Vehicle and brand names are used for fitment reference only. This is a modified performance fuel system component sold for racing and competition use only, with no warranty beyond your rights under the Australian Consumer Law. Installation should be carried out by a competent diesel technician and a custom ECU tune is required. Power figures depend on supporting mods, fuel quality, tune and dyno; treat them as targets, not promises. Confirming fitment is the buyer's responsibility. Modifications of this kind may affect manufacturer warranty, insurance and road compliance.
