Denso
Genuine Denso 4JJ3 Injectors 295700-1060 | Isuzu D-MAX, MU-X, Mazda BT-50 2020 On
Genuine Denso 4JJ3 Injectors 295700-1060 | Isuzu D-MAX, MU-X, Mazda BT-50 2020 On
Taxes excluded. Shipping calculated at checkout.
Couldn't load pickup availability
Share
Genuine Denso 4JJ3 Injectors 295700-1060
Set of 4 | Isuzu D-MAX, MU-X and Mazda BT-50 3.0L 4JJ3-TCX, 2020 On
Brand new set of four genuine Denso 295700-1060 injectors, the factory injector for the 3.0L 4JJ3-TCX in the current Isuzu D-MAX, Isuzu MU-X and Mazda BT-50. Exact OEM replacement, supplied new with the Denso A9 compensation code on each injector. No exchange, no core, no reconditioned bodies.
Fitment
| Vehicle | Engine | Build dates | Code prefix |
|---|---|---|---|
| Isuzu D-MAX (RG, third generation) | 4JJ3-TCX 3.0L | 09/2020 on | A9 |
| Isuzu MU-X (third generation) | 4JJ3-TCX 3.0L | 08/2021 on | A9 |
| Mazda BT-50 (TF) | 4JJ3-TCX 3.0L | 10/2020 on | A9 |
Quick check: the 4JJ3 is a different engine to the 4JJ1 and the injectors do not interchange. Pull the engine cover and read the code on top of an injector. A9 means this is your injector. A code starting with 72 or 5F is a 4JJ1 and you want our D-MAX injectors by year guide.
Not sure? Add your VIN or State and Rego to the order notes and we will confirm before dispatch.
Part Numbers
| Denso | 295700-1060 |
| Isuzu / Mazda | 8-98399618-0 |
| Compensation code | Begins with A9, printed on the top of each injector |
| Supplied as | Full engine set of 4, brand new, genuine Denso |
What Else You Need for the Install
- Genuine 4JJ3 Injector Seat Washer Set 8-98362076-1. Single-use crush seals. The 4JJ3 washer is different to the 4JJ1 washer.
- New injector-to-cover seals and leak-off clips are strongly recommended while the cover is off.
Pro tip: never reuse the seat washers. A reused washer is the usual cause of injector rattle and blow-by on a fresh set.
Fitting and Coding Notes
- Enter each injector's A9 compensation code into the ECU in the correct cylinder position, then run the Isuzu injector learn procedure with a suitable scan tool.
- Clean the bores and seat faces, fit new seat washers, torque the clamp bolts to Isuzu specification.
- Clean-room practice. A single speck of grit in a common rail injector is enough to cause a misfire or a stuck needle.
- Installation by a qualified diesel technician recommended.
Want More Power?
For a tuned 4JJ3 we build the same genuine Denso body with a +30% nozzle: 4JJ3 +30 Injectors. Tune required.
Stock and Lead Time
Generally in stock and shipping same or next business day. If we are between shipments, allow 1 to 2 weeks. On a deadline? Message us before ordering and we will confirm.
Shipping and Payment
- Free insured express shipping Australia wide. Full tracking included.
- Buy now, pay later. Afterpay, Humm, Klarna and Zip.
- International shipping available. Message us for a quote.
Warranty and Fitment Disclaimer
Full manufacturer's warranty applies when fitted and coded by a qualified diesel technician. See our Refund, Returns and Warranty Policy.
It is the customer's responsibility to verify fitment before installation. Rego and VIN checks confirm what the vehicle left the factory with, which may not be correct if the fuel system has been changed.
Frequently Asked Questions
Q: Are these genuine or aftermarket?
A: Genuine Denso 295700-1060, brand new. Not remanufactured, not exchange, not a copy.
Q: Do I need to code them?
A: Yes. Each injector carries an A9 compensation code that must be entered into the ECU, followed by the injector learn procedure with a scan tool.
Q: Will these fit a 4JJ1 D-MAX?
A: No. The 4JJ3 is a different engine with a different injector. If your code starts with 72 or 5F you have a 4JJ1. See our D-MAX injectors by year guide or send us your rego.
Q: Do they come with seat washers?
A: No. Order the genuine 4JJ3 seat washer set alongside them. They are single-use and the 4JJ3 washer is different to the 4JJ1.
Q: Do they fit the Mazda BT-50?
A: Yes. The TF BT-50 from 10/2020 uses the same Isuzu 4JJ3-TCX engine and the same injector.
Genuine Denso. A9 Coded. Straight Back to Factory.
Set of 4 for the 4JJ3-TCX D-MAX, MU-X and BT-50 from 2020. Free express shipping Australia wide.
Disclaimer: Common Rail Cowboys is not affiliated with Isuzu Motors, Mazda Motor Corporation or Denso Corporation. Injectors should be fitted and coded by a competent diesel technician. Fitment verification is the buyer's responsibility.
