Land Cruiser 200 Series Pre-Filter + Catch Can Kit - (FMPV614DPC)

Fuel Manager Pre-Filter Kit

• FM100 30 micron filter assembly with clear bowl
• LC200-specific mounting bracket
• DFL12 12mm fuel line rubber hose
• 2 x 12mm push-on straight fittings
• 2 x 12mm hose clamps
• 2 x plugs
• Engine bay and windscreen labels

ProVent Ultimate Catch Can Kit

• MANN+HUMMEL ProVent 200 catch can
• LC200-specific mounting bracket
• 16mm hose and fitting kit
• 16mm 90 degree joiner and 19 to 16mm reducing elbow
• Drain tap assembly with hose
• M8 bolts, washers and nuts
• Spring clamps and cable ties

Not included: Fuel Manager water alarm (FMALARM). Available separately.

Mounts between the tank and the factory filter and pulls water and particles out of the fuel before they reach the injection system.

• 95% water separation with superior particle removal.
• Separates emulsified water from ULSD.
• Clear bowl: you can see collected water and drain it.
• No filter bypass, so contaminated fuel does not get through.
• Protects against corrosion and abrasive wear in the pump and injectors.
• Optional water alarm (FMALARM) available separately.

Separates oil and air from crankcase blow-by gas and keeps it out of the intake, with the option to return the oil to the sump.

• 98% oil separation efficiency.
• Keeps oil and soot out of the intake, intercooler and turbo.
• Regulates crankcase pressure.
• Reduces oil consumption where the oil is returned to the sump.
• Reduces exhaust smoke and odours.

• Toyota Land Cruiser 200 Series, 1VD-FTV 4.5L V8 twin turbo diesel, 2007 to 2022

Fitment per Direction Plus as of October 2026. Check the fitment guide or send us your VIN if unsure.

• Fuel Manager mounts on top of the factory fuel filter. Some early models need it mounted underneath for bonnet clearance.
• 12mm fuel line connections, bracket uses factory mounting points.
• ProVent mounts on the driver side of the engine bay.
• 16mm crankcase hose connections, drain tap routed under the vehicle.
• The two systems can be fitted together or separately. We recommend a competent mechanic.
• Servicing: drain the Fuel Manager bowl when water collects and replace the 30 micron element (31863) at your service interval. Check and drain the ProVent regularly and replace the element (PVE200DP) at your service interval.

• Free express shipping Australia-wide.
• Pay in full or split it with Afterpay, Humm, Klarna or Zip at checkout.
• Tracking is sent as soon as the kit is on its way.
• Returns and warranty are handled under our refund policy.

Q: Can I buy the two systems separately?
A: Yes. The Fuel Manager and ProVent kits are listed individually. The combo gets you both in one order.

Q: Does the Fuel Manager have a water alarm?
A: Not in the box. The FMALARM water alarm is a separate accessory and gives a visual and audible warning when water is detected.

Q: Will the Fuel Manager fit under the bonnet?
A: Most models mount it on top of the factory filter. Some early models need under-mounting for bonnet clearance. Check clearance during installation.