Australian-delivered 120 Series only received the 1KD-FTV from November 2006 as a Euro 4 engine. Earlier 120 diesels here are the 1KZ-TE, which is not common rail.

Quick check: read the number stamped on your existing rail. 095440-095# means this is your rail. 095440-055# (Toyota 23810-0L010 / 0L020) is the earlier Euro 3 rail on pre 08/2006 Hilux and 2KD Hiace, and this is not the right part for it.

Not sure? Add your VIN or State and Rego to the order notes and we will confirm before dispatch.

• If the rail body is sound and only the relief valve is weeping, the 1KD Electronic Pressure Relief Valve on its own may be all you need.
• If the fault is a drifting or dead sensor, see the 1KD Rail Pressure Sensor, 6 Pin.
• A damaged pump-to-rail supply pipe is a separate part: 1KD Fuel Pump to Rail Inlet Pipe 23804-30050.
• Low actual rail pressure with a healthy rail usually points at the supply pump, SCV or injectors. Diagnose before you buy.

• Direct bolt-on replacement, no modification required.
• Fit new injector lines where Toyota specifies and torque every high pressure union to spec. See the Genuine 1KD Injector Line Kit.
• Keep everything surgically clean. Contamination is the number one killer of common rail components.
• Installation by a qualified diesel technician recommended.

• Free insured express shipping Australia wide. Full tracking included.
• Buy now, pay later. Afterpay, Humm, Klarna and Zip.
• International shipping available. Message us for a quote.

Full manufacturer's warranty applies when fitted by a qualified diesel technician. See our Refund, Returns and Warranty Policy.

It is the customer's responsibility to verify fitment before installation. Rego and VIN checks confirm what the vehicle left the factory with, which may not be correct if the fuel system has been changed.

Q: Is this a new or second hand rail?

A: Brand new genuine Toyota / Denso. Not second hand, not reconditioned.

Q: Does it come with the pressure sensor and relief valve?

A: Yes. It is a complete assembly with the rail pressure sensor and electronic pressure relief valve already fitted.

Q: How do I know it fits my vehicle?

A: Check the number stamped on your existing rail. 095440-095# confirms this is the correct replacement. 095440-055# is the earlier Euro 3 rail and needs a different part. Or leave your rego and state at checkout and we will verify it.

Q: Will this fix my rail pressure fault?

A: If the cause is a leaking relief valve or a faulty rail sensor, yes. The supply pump, SCV and injectors can throw similar symptoms, so diagnose first. If only the relief valve is leaking, the valve alone may be all you need.

Q: Does it come with a warranty?

A: Yes, full manufacturer's warranty when installed by a qualified diesel technician.