Denso
1KD Fuel Pump - 294000-0700
1KD Fuel Pump - 294000-0700
Taxes included. Shipping calculated at checkout.
Couldn't load pickup availability
Genuine Denso HP3 | Brand New | Suits 1KD-FTV and 2KD-FTV | No Core Exchange
Brand new genuine Denso HP3 supply pump, part 294000-0700. This is the factory common rail pump fitted to Toyota's 1KD-FTV 3.0L across Hilux, Prado and Hiace, and shared with the 2KD-FTV 2.5L in Hiace vans.
Direct bolt-in replacement. No core exchange, no reconditioned internals. The pump Toyota fitted from the factory, built to Denso factory spec.
Quick fitment check: pull the tag on your old pump. If the number starts with 294000-070# or 294000-036# (or the Toyota tag reads 22100-30090 / 22100-30040), this is your pump. The last digit of the Denso number is a revision and does not affect fitment. Different prefix? Send us the number and we will confirm before you order.
Vehicle Fitment
- Toyota Hilux N70 (KUN26): 1KD-FTV 3.0L, 2005 onwards
- Toyota LandCruiser Prado 120 (KDJ120 / KDJ125): 1KD-FTV 3.0L, 11/2006 to 2009
- Toyota LandCruiser Prado 150 (KDJ150): 1KD-FTV 3.0L, 12/2010 onwards*
- Toyota Hiace (KDH201 / KDH221 / KDH223): 1KD-FTV 3.0L, 2005 onwards
- Toyota Hiace (KDH200 / KDH220 / KDH222): 2KD-FTV 2.5L, 2005 onwards
*Late model vehicles can carry a different pump revision. Always confirm using the part number check above before ordering.
- Prado 120 models before 11/2006 ran the 1KZ-TE, which uses a completely different mechanical pump. This listing is common rail D-4D only.
- Leave your rego and state or VIN at checkout and we will double-check compatibility before dispatch.
Part Numbers
- Denso (current): 294000-0700
- Denso (superseded by this pump): 294000-0360 (any 294000-036#)
- Toyota OE: 22100-30090, 22100-30040
- Pump type: Denso HP3 common rail supply pump, SCV fitted
- Condition: brand new, genuine Denso, no core return required
Fitting Notes
- Direct bolt-in replacement, no modifications required
- We strongly recommend installation by a qualified diesel technician, with a new fuel filter fitted and the fuel system inspected for contamination
- If your old pump failed from dirty fuel, flush the lines, rail and injectors to protect the new pump
Shipping and Payment
- Free express shipping Australia-wide
- Afterpay, Humm, Klarna and Zip available at checkout
- Packed safe and secure, shipped fast
- Warranty and returns are covered by our refund policy
Frequently Asked Questions
Is this a brand new pump or reconditioned?
Brand new genuine Denso, not reconditioned and not exchange based.
Do I need to return my old pump?
No core return required. You keep your old pump.
Will this fit my Prado 120?
Yes, it suits Prado 120 models with the 1KD-FTV D-4D engine from 11/2006 onwards. Earlier 120s ran the 1KZ-TE which uses a different pump. Confirm by VIN if unsure.
How do I know it fits my vehicle?
Check the tag on your existing pump. Numbers starting with 294000-070# or 294000-036#, or Toyota 22100-30090 / 22100-30040, confirm this is the correct pump. Or leave your rego and state at checkout and we will verify it for you.
The Pump Toyota Fitted. Brand New. No Core.
Not sure on fitment? Text us on 0483 930 906 or email info@commonrailcowboys.com with your pump number and we will confirm before you order.
Common Rail Cowboys is not affiliated with Toyota Motor Corporation or Denso. Vehicle and brand names are used for fitment reference only. Installation should be carried out by a competent diesel technician. Confirming fitment against your existing pump number or VIN is the buyer's responsibility.
