1KD Garrett Turbocharger – Drop-In Performance Upgrade

✅ Direct Bolt-On | ✅ Billet Wheel | ✅ Free Express Shipping

Take your N70 Hilux to the next level with the **Garrett GTB2256VZK Turbocharger**, built specifically for the **1KD-FTV 3.0L engine**. This drop-in upgrade delivers faster spool, smoother throttle response, and rock-solid boost control — all in a proven Garrett package.

💨 Why Upgrade to a Garrett 1KD Turbo?

• Billet Compressor Wheel – Improved airflow and response over cast wheels
• True Drop-In Fitment – Direct bolt-on to N70 Hilux 1KD engines
• Garrett Reliability – Built tough to handle high boost and heat
• Boost Target: Up to 26 PSI with supporting mods
• Power Potential: Capable of 220+ RWHP with tuning

📦 What’s Included:

• 1 x Genuine Garrett GTB2256VZK / 909930-5001Y Turbocharger

🔧 Fitment:

• Toyota Hilux N70 – 1KD-FTV 3.0L
• Toyota Prado 120 – 1KD-FTV 3.0L (requires actuator swap or harness extension)
• Toyota Prado 150 – 1KD-FTV 3.0L (requires actuator swap or harness extension)

🔩 Optional Add-Ons:

• Turbo Install Kit – Gaskets, studs, nuts, and lube
• Standard Replacement Turbos also available

💳 Buy Now, Pay Later

Afterpay, Humm, Klarna & Zip – Boost now, pay later.

🚚 Free Express Shipping Australia-Wide

Dispatched fast from our Aussie warehouse – no BS.

⚠️ Please Note:

Running a 3-inch exhaust without a tune may trigger a P1251 overboost fault. We strongly recommend a custom tune to get the most out of this turbo.

🔥 Unleash Your 1KD – Get Garrett Power Under Your Bonnet

❓ Frequently Asked Questions – 1KD Garrett Turbocharger

Q: Is the Garrett GTB2256VZK turbo a direct fit for the Toyota Hilux N70?
A: Yes – it’s a direct bolt-on upgrade for 1KD-FTV engines in the Hilux N70 (2005–2015). No fabrication required, but tuning is recommended for best results.

Q: What boost pressure can the Garrett 1KD turbo safely run?
A: This turbo is rated for up to 26 PSI boost with the correct supporting mods and ECU tuning.

Q: Do I need a tune to run this Garrett turbo on my 1KD?
A: While it can run on a stock tune, we strongly recommend remapping the ECU to prevent overboost codes (like P1251) and maximize power output.

Q: Will this turbo fit a Prado 120 or 150 series?
A: Yes – it fits both Prado 120 and 150 series with the 1KD-FTV engine. However, the actuator will need to be swapped or a harness extension used.

Q: Can I use this turbo with a 3-inch exhaust?
A: Yes – but without tuning, a 3” exhaust may trigger overboost fault codes. A remap is highly recommended in this case.