• Common Rail Cowboys N70 Hilux Turbo standard turbocharger for Toyota Hilux, showing the metal turbine and compressor components.
  • Common Rail Cowboys N70 Hilux Turbo standard turbocharger for Toyota Hilux, shown in a detailed product image.
1 2

Common Rail Cowboys

N70 Hilux Turbo - Standard

N70 Hilux Turbo - Standard

(4)

$1,249.00 AUD
$1,413.36 AUD $1,249.00 AUD
Sale Sold out

Taxes included. Shipping calculated at checkout.

Ships Same or Next Business Day
Secure Checkout
VISA Pay Pay
Warranty on every part Manufacturing defects covered, in addition to your Australian Consumer Law rights. Faulty? Stop driving and text us first. 30-day returns Unfitted, unused, in original packaging. Approval required. Return freight is on you. Conditions and exclusions apply, see our returns policy.
N70 Hilux Turbo: Standard

OEM-Spec CT16V | 17201-0L040 | VNT Actuator Pre-Installed | Toyota Hilux KUN26 1KD-FTV (2005 to 2015)

CRC Standard SeriesOEM Spec CT16VVNT Actuator Pre-InstalledGaskets IncludedAfterpay, Humm, Klarna, ZipFree Express Shipping AU

1KD turbo beyond repair and a rebuild is not the right call? This is the clean solution. An OEM-spec CT16V replacement turbo engineered to match factory performance, bolt straight in and get your Hilux back on the road without the dealership markup or the wait.

Comes complete with new gaskets and a pre-installed VNT actuator. Everything for a full turbo swap in one box, built to meet original equipment specifications for the Toyota Hilux KUN26 1KD-FTV.

Want more power? This is not the part for that. Look at the Flex 44mm VNT drop-in instead.

What Is Included
  • CT16V turbocharger, part no. 17201-0L040
  • New gaskets
  • New VNT actuator (pre-installed)
  • General installation advice and support

While you are in there, add the Turbo Gasket, Stud and Nut Kit. Replace worn studs and nuts at the same time for a complete, professional install. Saves pulling things apart again later.

View Gasket, Stud and Nut Kit
Vehicle Fitment
  • Toyota Hilux N70 KUN26, 1KD-FTV (2005 to 2015)

Direct replacement, engineered to OEM spec for the CT16V turbocharger fitted to 1KD-FTV engines. Part no. 17201-0L040.

Fitting Notes
  • Direct bolt-in replacement, no modifications required
  • VNT actuator is pre-installed and calibrated
  • Replace all gaskets, studs and nuts during install (kit available above)
  • Pre-oil the turbo and prime the oil system before first start. Run the engine at idle briefly before driving
  • Clear any stored fault codes after installation
  • Professional installation recommended
  • Do not use RTV or gasket maker on the flanges
Important: always use fresh oil and replace the oil feed line if worn. A contaminated oil supply is the leading cause of premature turbo failure.
Shipping and Payment
  • Buy now, pay later: Afterpay, Humm, Klarna and Zip available
  • Free express shipping Australia-wide
  • Fast, trackable dispatch, same or next business day when in stock

Warranty and returns are covered by our refund policy.

Frequently Asked Questions

Is the actuator included?
Yes. A new VNT actuator comes pre-installed and calibrated.

Do I need a tune?
No. This is an OEM-spec replacement for the factory CT16V. It bolts in and runs on the factory calibration.

Will it make more power?
No. It matches factory performance. For more power, look at the Flex 44mm VNT drop-in linked above.

Should I replace the studs and nuts?
Yes. Grab the Turbo Gasket, Stud and Nut Kit and do it once, properly.

Get Your Hilux Back On The Road.

OEM-spec CT16V with VNT actuator pre-installed. Gaskets included. Free express shipping Australia-wide.

Common Rail Cowboys is not affiliated with Toyota Motor Corporation. Vehicle and part names are used for fitment identification only. Professional installation by a competent person is recommended. Confirming fitment is the buyer's responsibility. Modifications may affect your vehicle's warranty and compliance.

View full details