Denso
Genuine Denso YD25 Injectors 095000-6250 | Nissan Navara D40, Pathfinder R51 Euro 4 | Standard or +30 | Set of 4
Genuine Denso YD25 Injectors 095000-6250 | Nissan Navara D40, Pathfinder R51 Euro 4 | Standard or +30 | Set of 4
Taxes included. Shipping calculated at checkout.
Couldn't load pickup availability
Genuine Denso YD25 Injectors 095000-6250
Set of 4 | Nissan Navara D40 and Pathfinder R51 2.5L dCi Euro 4 | Standard or +30% Modified
Brand new set of four genuine Denso 095000-6250 injectors, the Euro 4 injector for the 2.5L YD25DDTi in the Navara D40 and Pathfinder R51. Supplied with nozzle washers, body O-rings and leak-off washers, so the set goes straight in. Buy them standard for an OEM replacement, or +30% modified with MCR Performance nozzles for a tuned Navara. New, not exchange, not reconditioned.
Fitment
| Vehicle | VIN prefix | Engine | Build dates |
|---|---|---|---|
| Nissan Navara D40, Thai built | MNT | YD25DDTi 2.5L, Euro 4 | 07/2007 to 10/2015 |
| Nissan Navara D40, Spain built | VSK | YD25DDTi 2.5L, Euro 4 | approx 09/2006 to 01/2010 |
| Nissan Pathfinder R51, Spain built | VSK | YD25DDTi 2.5L, Euro 4 | approx 09/2006 to 01/2010 |
Quick check: the first three characters of your VIN and the number stamped on your injector. 095000-6250 means this set. Spain-built D40 and R51 from 2010 moved to the Euro 5 injector, 295050-0300. The D22 Navara uses 095000-6240. Neither is this part.
Not sure? Add your VIN or State and Rego to the order notes and we will confirm before dispatch. Date ranges are a guide; the stamped number is the source of truth.
Part Numbers
| Denso | 095000-6250 |
| Nissan | 16600-EB70B, 16600-EB70C, 16600-EB70D, 16600-EC00A, 16600-EC00B, 16600-EC00C, 16600-EC00D, 16600-EC00E |
| Supplied as | Full engine set of 4, brand new, genuine Denso, with nozzle washers, body O-rings and leak-off washers |
Select +30% Modified Set and we build the same genuine Denso 095000-6250 bodies with MCR Performance +30% nozzles on our bench. Roughly a third more fuel per stroke at the same pulse width, for a Navara going on a remap.
Tune required. The factory map does not know the nozzle changed. Works on the factory turbo with a suitable tune. Built to order, typically 0 to 2 business days, up to 1 to 3 weeks if we are waiting on parts. Bodies still good? YD25 D40 +30 MCR nozzles only.
Genuine refers to the injector body on a modified set. The nozzle and flow characteristics differ from OEM specification and the flow figure is nominal. Any change to emissions equipment or calibration must comply with the laws that apply to your vehicle and its use.
What's in the Box
- 4 x genuine Denso 095000-6250 injectors, standard or +30 modified
- 4 x injector nozzle (seat) washers
- 4 x injector body O-rings
- Injector leak-off washers
Rocker cover and injector seal kit sold separately if the cover is coming off: YD25 injector and rocker cover fitting kit.
Fitting and Coding Notes
- Enter each injector's compensation code into the ECU in the correct cylinder position with a suitable scan tool, then run the learn procedure.
- Clean the bores and seat faces, fit the supplied washers and O-rings, torque the clamp bolts to Nissan specification.
- Clean-room practice. A single speck of grit in a common rail injector is enough to cause a misfire or a stuck needle.
- Installation by a qualified diesel technician recommended.
Stock and Lead Time
Standard sets are generally in stock and ship same or next business day; if we are between shipments allow 1 to 2 weeks. Modified sets are built to order. On a deadline? Message us before ordering and we will confirm.
Shipping and Payment
- Free insured express shipping Australia wide. Full tracking included.
- Buy now, pay later. Afterpay, Humm, Klarna and Zip.
- International shipping available. Message us for a quote.
Warranty and Fitment Disclaimer
Full manufacturer's warranty applies to standard sets when fitted and coded by a qualified diesel technician. See our Refund, Returns and Warranty Policy.
It is the customer's responsibility to verify fitment before installation. Rego and VIN checks confirm what the vehicle left the factory with, which may not be correct if the fuel system has been changed.
Frequently Asked Questions
Q: Are these genuine or aftermarket?
A: Genuine Denso 095000-6250, brand new. Not remanufactured, not exchange, not a copy.
Q: Which YD25 injector do I have?
A: Read the number on the injector. 095000-6250 is the Euro 4 D40 and R51. 295050-0300 is the later Euro 5 Spain-built D40. 095000-6240 is the D22. They do not interchange.
Q: Do they come with seals?
A: Yes. Nozzle washers, body O-rings and leak-off washers are in the box.
Q: Do the +30 injectors need a tune?
A: Yes. An ECU remap is essential for the modified set. Standard sets need no tune.
Q: Do I need to code them?
A: Yes, standard or modified. Each injector's compensation code must be entered into the ECU, followed by the learn procedure.
Genuine Denso. Seals in the Box. Standard or +30.
Set of 4 for the Euro 4 YD25 Navara D40 and Pathfinder R51. Free express shipping Australia wide.
Disclaimer: Common Rail Cowboys is not affiliated with Nissan Motor Corporation or Denso Corporation. Injectors should be fitted and coded by a competent diesel technician. Fitment and compliance are the buyer's responsibility.
