Land Cruiser 70 series 1VD-FTV Throttle Controller - TR+

LandCruiser 70 Series 1VD-FTV: 2007 to 2012, no airbag models only. Direction Plus's TR0567DP description lists the 70 Series 1VD-FTV 2007 to 2012 with the note "Fits only in no airbag model. Check website for plug configuration." Its fitment table assigns the 1VD-FTV 70 Series 2012 to 2017 and 2018 to 2024, and the 1GD-FTV 70 Series (2023 on), to TR0830DP. The same table also shows a TR0567DP row to 2016, which overlaps; we list 2007 to 2012 to match DP's description and Additional Information. If your truck is a 2012 or later build, has airbags, or you are not sure, send us your VIN before ordering.

Full TR0567DP fitment as listed by Direction Plus:

Not covered by this part number: Direction Plus assigns LandCruiser 70 Series 1VD-FTV 2012 to 2017 and 2018 to 2024, LandCruiser 70 1GD-FTV (2023 on), Prado 150 1KD-FTV (2009 to 2015), Prado 150, 155 and 250 1GD-FTV, Hilux and Fortuner 1GD-FTV, and LandCruiser 200 and 300 to a different controller, TR0830DP, which is not this listing. Direction Plus also states TR0567DP fits LandCruiser 70 Series no airbag models only. Hilux 1KD-FTV: Direction Plus lists 2004 to 2006 and 2008 to 2015 as two ranges; if you have a 2007 build, send us your VIN first.

Fitment per Direction Plus as of October 2026. Check the fitment guide or send us your VIN if unsure.

• Removes throttle lag by adjusting the pedal signal before it reaches the ECU. The response matches the pedal you pressed.
• 6 driving modes, each with 9 sensitivity levels
• CRAWL mode: dulled, fine pedal control for towing, reversing a trailer, sand and technical tracks
• BEAST mode: sharpest response for on-road punch and overtaking
• Everyday and economy profiles in between
• Dash-mounted controller for on-the-fly changes

Worth knowing: a throttle controller changes how the pedal feels, not how much power the engine makes. What it fixes is the delay. Start mid-level and fine-tune from there.

• Plug and play on the factory accelerator pedal connectors. Under 5 minutes.
• No cutting, soldering, splicing or ECU flashing
• Fully reversible: unplug it and the vehicle is back to stock
• Runs alongside an ECU remap or tune

Quick steps:

1. Unplug the pedal connector and insert the inline patch harness.
2. Mount the dash controller within reach.
3. Select a mode and adjust sensitivity.

• Free Express Shipping Australia-Wide, tracking sent as soon as it is on its way
• Buy Now, Pay Later: Afterpay, Humm, Klarna and Zip
• Returns and warranty: see our refund policy

Q: Will it add power?

A: No. It sharpens pedal response and removes the factory delay. Engine output is unchanged. If you want more power, that is a tune and hardware conversation.

Q: Can I run it with a remap or tune?

A: Yes. The TR+ adjusts the throttle signal only and does not touch the ECU, so it works alongside a remap.

Q: Does it modify the ECU or void the tune?

A: No ECU flashing and no permanent changes. It is an inline, plug-in controller using the factory connectors and is removable in minutes.

Q: Is CRAWL mode actually useful?

A: Yes. It dulls the pedal right down, which is exactly what you want picking your way over rocks, on sand or reversing a trailer.

Q: My 79 Series has airbags. Does this fit?

A: No. Direction Plus states TR0567DP fits no airbag 70 Series only. It lists the 1VD-FTV 70 Series 2012 to 2017 and 2018 to 2024 under TR0830DP, a different controller. Send us your VIN and we will confirm which one you need.