• Toyota LandCruiser 70 Series – 1VD-FTV 4.5L V8 Diesel | 2012–2017

⚠️ Driver-side mounting location

⚠️ Suits ONLY vehicles equipped with ABS

• 100% water separation (based on 300 µm droplet size)
• 98% particle separation (30 micron particles)
• In-cab multi-stage water alert (visual + audible)
• Protects against corrosion and abrasive wear
• Spin-on style filter for easy servicing
• No manual water level checks required

• Filter Type: MANN+HUMMEL PreLine-Plus (PL150DP)
• Water Separation: 100% efficiency (300 µm droplet size)
• Particle Filtration: 98% at 30 micron
• Service Interval: Replace element every 40,000 km or per vehicle service schedule
• Flow Rate: Up to 150 L/h
• Mounting: Driver-side location
• Compatibility Note: ABS-equipped vehicles only

• PL150DP PreLine-Plus filter assembly
• LC70-specific mounting bracket
• Complete fuel line and fitting kit
• Mounting hardware (bolts, washers, nuts)
• Water alarm kit with wiring
• Installation instructions
• Cable ties for secure routing

Recommended: Competent qualified mechanic

DIY Time: 2–2.5 hours

Location: Driver-side mounting (ABS-equipped vehicles only)

Important Notes:

• This kit is designed for the driver-side mounting location
• Compatible ONLY with LC70 models equipped with ABS
• Non-ABS vehicles require different mounting configuration

Installation includes:

• Mounting bracket installation
• PreLine assembly fitment
• Fuel line routing (tank → PreLine → factory filter)
• Water alarm system installation
• System priming and leak testing

Filter Replacement: Every 40,000 km or per vehicle service schedule

Replacement Element: PL150DP (~$65–$85)

Water Draining: In-cab alarm alerts when water detected. Open drain tap to release.

Filter Changes: Spin-on design for quick, tool-free cartridge replacement

Q: Will this void my Toyota warranty?

A: No. Aftermarket protection devices don't void warranty under Australian Consumer Law.

Q: Why is this only for ABS-equipped vehicles?

A: The mounting location on the driver side requires the ABS module configuration present in ABS-equipped LC70 models. Non-ABS vehicles have different chassis layouts in this area.

Q: I have a 2018+ LC70 with the 1VD-FTV. Will this fit?

A: No. The 2018-2022 LC70 models require the PL642DPK kit, which is designed for the updated chassis configuration.

Q: What's the difference between PL640DPK and PL642DPK?

A: PL640DPK fits 2012-2017 models, PL642DPK fits 2018-2022 models. Toyota made chassis changes in 2018 that require different mounting brackets.

Q: How do I know if my LC70 has ABS?

A: Check for ABS warning light on your instrument cluster during startup, or look for the ABS module mounted on the driver-side chassis rail near the brake master cylinder.

• 💳 All major cards accepted
• Buy Now, Pay Later: Afterpay • Zip • Humm • Klarna
• ✓ Free Express Shipping Australia-Wide
• ✓ Same-day dispatch (orders before 2pm AEST)