NPC
NPC Throw-Out Bearing BRG2411 | Suits NPC8006-1B Heavy Duty Clutch | Toyota Hilux N70 1KD
NPC Throw-Out Bearing BRG2411 | Suits NPC8006-1B Heavy Duty Clutch | Toyota Hilux N70 1KD
Taxes included. Shipping calculated at checkout.
Couldn't load pickup availability
NPC Throw-Out Bearing, 8006 Style Heavy Duty Organic Clutch
Genuine NPC / Exedy Release Bearing | Toyota Hilux N70 1KD NPC8006-1B Kits
Replacement release (throw-out) bearing for the NPC 8006 style Heavy Duty organic clutch in the N70 Hilux. The one to fit when the bearing is noisy, the gearbox is out for another reason, or you are refreshing a kit that has done its kilometres. Genuine NPC supplied, Exedy made.
Fitment
| Suits | Vehicle | Bearing |
|---|---|---|
| NPC8006-1B Heavy Duty organic, the light pedal kit | Toyota Hilux N70 KUN16 / KUN26 1KD-FTV, 2005 to 2015 | This bearing |
| NPC7678-1D Super Heavy Duty and NPC7678-1D/1 Ultra HD | Toyota Hilux N70 KUN16 / KUN26 1KD-FTV | Different bearing, message us |
Quick check: NPC use two different release bearings across their N70 range. This one is for the 8006 style Heavy Duty organic cover, the kit with the near-factory pedal. If your kit is the 7678 Super Heavy Duty, or you are not sure which cover you have, message us with your NPC part number or a photo of the cover before ordering.
Part Numbers
| Bearing | BRG2411 |
| Suits | NPC8006-1B Heavy Duty organic clutch kit, Hilux N70 |
| Supplied as | 1 x release bearing, genuine NPC / Exedy |
Fitting Notes
- Gearbox out. Check the fork, pivot and slave cylinder while you are there; a worn pivot will kill a new bearing.
- Lightly grease the fork contact points and the input shaft sleeve as per NPC's fitting notes. Do not pack the bearing.
- Trial fit and check release bearing height against the cover before the box goes back in.
Shipping and Payment
- Free express shipping Australia wide. Full tracking included.
- Buy now, pay later. Afterpay, Humm, Klarna and Zip.
- International shipping available. Message us for a quote.
Frequently Asked Questions
Q: Will it fit my NPC 750 kit?
A: Only if your kit is the 8006 style cover. The 7678 Super Heavy Duty uses a different bearing. Message us with your part number and we will confirm.
Q: Is it genuine?
A: Yes. Supplied by NPC, made by Exedy.
Q: Should I replace it with a new clutch?
A: NPC kits come with a bearing. This is for a mid-life replacement or a bearing that has failed early.
The Right Bearing for the 8006 Cover.
Genuine NPC / Exedy release bearing for the N70 Hilux Heavy Duty organic kit. Free express shipping Australia wide.
Disclaimer: Common Rail Cowboys is not affiliated with Toyota Motor Corporation. Fitment verification is the buyer's responsibility.
