Toyota Genuine
Toyota Genuine 1KD-FTV Intake Manifold Gasket 17177-30011 | Hilux N70 and Prado
Toyota Genuine 1KD-FTV Intake Manifold Gasket 17177-30011 | Hilux N70 and Prado
Taxes included. Shipping calculated at checkout.
Couldn't load pickup availability
Share
Genuine Toyota intake manifold gasket for the 1KD-FTV 3.0L D-4D. If you are pulling the intake manifold to clean out the usual EGR soot build-up, chasing a boost leak, or refreshing the top end, this is the gasket that goes back in. One-time-use sealing surface, so fit a new one every time the manifold comes off rather than gambling a full reassembly on a crushed old gasket.
| Specifications | |
|---|---|
| Part Number | 17177-30011 (Genuine Toyota) |
| Description | Gasket, intake manifold to cylinder head |
| Engine | 1KD-FTV 3.0L D-4D turbo diesel |
| Fitment | Toyota Hilux N70 (KUN16 / KUN26) 2005-2015, Prado KDJ120 / KDJ150 with 1KD-FTV |
| Quantity Required | 1 per engine |
| In the Box | 1 x genuine intake manifold gasket |
▸ Fitment Notes
Suits the 1KD-FTV as fitted to N70 Hilux and 120/150 Series Prado. If you are ordering for a 2KD-FTV or another D-4D variant, SMS us your VIN and we will confirm the correct gasket against the Toyota EPC before you order.
▸ Installation Notes
Clean both sealing faces back to bare metal before fitting, and take the opportunity to de-coke the manifold and inlet ports while it is off. Fit dry, no sealant required, and torque the manifold fasteners evenly in sequence. While you are in there, it is worth inspecting the EGR valve and cooler, since soot restriction there is usually why the manifold came off in the first place.
▸ Warranty & Returns
Covered under our standard warranty and returns policy. Full terms here: Warranty & Returns Policy.
▸ Shipping
Ships Australia-wide from Queensland. Small flat item, standard tracked post.