Denso
Genuine Denso 1GD-FTV Injectors - Hilux N80, Fortuner & Prado | 295700-0550
Genuine Denso 1GD-FTV Injectors - Hilux N80, Fortuner & Prado | 295700-0550
Taxes excluded. Shipping calculated at checkout.
Couldn't load pickup availability
Set of 4 brand new Genuine Denso common rail injectors - direct-fit OEM replacement for the Toyota 2.8L 1GD-FTV (2-pin Pre-i-ART) in the Hilux N80, Fortuner and Prado 150. The exact injectors Denso supplies to Toyota: factory spray pattern, factory flow, no copies and no recon.
⚠️ Check before you buy - 2-pin plug only
This set fits the 2-pin (Pre-i-ART) injector fitted from 2015 to 2020. Look at the plug on your old injector:
- Two wires into the connector, and the compensation code on the injector starts with 72 → correct part (this listing)
- Six wires → i-ART injector (2020-on 150kW engines), a different part - not this one. Contact us for i-ART options.
Not sure? Put your VIN or REGO in the add-to-cart notes and we’ll verify factory compatibility before it ships.
Fitment - Which 1GD Vehicles Does This Suit?
| Vehicle | Chassis | Years | Injector Type |
|---|---|---|---|
| Toyota Hilux N80 | GUN122 / GUN125 / GUN126 | 2015 - 2020 | 2-pin Pre-i-ART (this listing) |
| Toyota Fortuner | GUN156 | 2016 - 2020 | 2-pin Pre-i-ART (this listing) |
| Toyota Prado 150 | GDJ150 / GDJ155 | 2015 - 2020 | 2-pin Pre-i-ART (this listing) |
| 2020-on 150kW models | Hilux / Fortuner / Prado | 2020 On | 6-wire i-ART - different injector, contact us |
Pre-i-ART (2-pin) engines only. Confirm against your VIN, REGO, or the number on your original injector.
What you get
- 4 × brand new Genuine Denso 1GD-FTV injectors (Denso 295700-0550)
- Outright purchase - no core deposit, no core return
- Sealed Genuine Denso packaging
Signs your injectors are due
- Diesel knock or rattle on cold start that won’t settle
- White smoke at idle or black smoke under load
- Dropping fuel economy and loss of power
- Injector compensation values drifting out of spec on a scan tool
- Rough idle or a misfire that follows the cylinder when you swap injectors
Not sure they’re done? We bench test 1GD injectors in-house on our Hartridge Sabre CRi Expert - text or message us for a mail-in test before you commit to a new set.
Cross-reference part numbers
Denso: 295700-0550 (also 295700-0520 / -0160 / -0150)
Toyota OEM: 23670-0E010 · 23670-09420 · 23670-11010 · 23670-19015
New or reconditioned?
Brand new, Genuine Denso - not reconditioned, not remanufactured, not exchange. No core deposit, no core return.
Do these need a tune or coding?
No. Standard Genuine Denso injectors - direct plug-and-play replacement, no tune and no calibration coding required on the factory engine.
Running a tune or a bigger turbo?
These are standard OEM-flow injectors. If you’re chasing more than stock power on a tuned 1GD, standard flow becomes the limit.
MCR +30% Injector Nozzles for the 1GD-FTV →
Available for both Pre-i-ART (2015-2020) and i-ART (2020-on) engines. ECU tune required.
What else you need for the install
1GD-FTV Injector Fuel Line Set - Hilux, Prado & Fortuner →
The high-pressure lines are a one-use crush fit. Reusing old lines is the number one cause of post-install leaks and injector contamination.
Shipping & warranty
Same-day dispatch* before cut-off, free express shipping Australia-wide. Backed by manufacturer new-part warranty - correct installation and clean fuel required.
