• 1VD Suction Control Valve – 294200-0690
  • 1VD Suction Control Valve – 294200-0690
  • 1VD Suction Control Valve – 294200-0690
1 3

Denso

1VD Suction Control Valve – 294200-0693

1VD Suction Control Valve – 294200-0693

$401.00 NZD
$401.00 NZD
Sale Sold out

Taxes excluded. Shipping calculated at checkout.

1VD Suction Control Valve – 294200-0693

 

Genuine Denso SCV for Toyota LandCruiser 1VD-FTV

Keep your 1VD running crisp with a Genuine Denso 294200-0693 Suction Control Valve. This fixes rough starts, sluggish throttle, and erratic idle caused by unstable fuel pressure. If you’re chasing smooth power delivery and better fuel economy, this is your go-to.

✅ Suits
  • Toyota LandCruiser 70 / 200 Series — 1VD-FTV 4.5L V8 Diesel

Unsure on fitment? Drop your VIN or Rego + State at checkout and we’ll confirm before dispatch.

🔧 Why Replace Your SCV?
  • Hard starts? Could be low rail pressure at ignition.
  • Inconsistent throttle? Might be fuel rail surge.
  • Rough idle or limp mode? A tired SCV is often to blame.
🔍 Key Features
  • Precision Fuel Regulation — maintains stable high-pressure supply
  • Genuine Denso Build — direct OEM fit, no mods needed
  • Improved Efficiency — helps reduce consumption and emissions
  • Durable Construction — built for heat and rail pressure
  • Restores Smoothness — reduces pressure fluctuation and surging
📦 Specs & Cross-Refs
  • Part Number: 294200-0693
  • Alt Part Numbers: 294200-0690, 294200-0691, 294200-0692, 294200-0669x (series)
  • Engine: Toyota 1VD-FTV
  • Material: High-grade metal + composite O-ring seal
  • Function: Regulates rail pressure to ECU demand
🧩 Notes on Interchange

All HP4 pumps accept multiple SCV supersessions.

🛠️ Install & Setup
Tools & Prep
  • Basic hand tools, lint-free wipes
  • Catch tray & safety glasses
  • New O-ring (supplied) lightly lubricated with clean diesel
Quick Steps
  1. Depressurise fuel system per service procedure.
  2. Disconnect SCV connector; remove the old valve and O-ring.
  3. Clean bore; install new O-ring and seat the new SCV squarely.
  4. Tighten to OEM spec; reconnect, prime, and start.
Post-Install Checks
  • Verify idle stability and commanded vs actual rail pressure.
  • Clear any stored DTCs; road test under load.
💳 Payments & 🚚 Shipping
  • Buy Now, Pay Later: Afterpay, Humm, Klarna, Zip
  • Free Express Shipping Australia-Wide
📦 Dispatch & Tracking
  • Fast, trackable dispatch — typically same or next business day (in-stock)
  • Signature on delivery available on request
🌏 International

Need international shipping? Message us for a quote before ordering.

⚠️ Stock Notice

Generally in stock; during peak demand allow 1–3 weeks. On a tight deadline? Message us before ordering.

👉 Get your LandCruiser running right—grab a genuine SCV and fix fuel pressure the proper way.

Frequently Asked Questions

Will this SCV fit my LandCruiser?
Yes — suits 1VD-FTV in 70 & 200 Series. If unsure, leave your VIN or Rego + State and we’ll confirm before dispatch.
Do I need calibration or coding after install?
Generally no coding. Follow OEM depressurise/prime procedure, then verify commanded vs actual rail pressure and clear any DTCs.
What symptoms indicate a failing SCV?
Hard starting, rough idle, throttle hesitation, surging, limp mode, or rail-pressure deviation codes are common signs.
Is this a genuine Denso part?
Yes — the valve is a Genuine Denso SCV (PN 294200-0693) supplied with the correct O-ring.
Will other part numbers cross over?
Common supersessions include 294200-0690 / -0691 / -0692 and some -0669x series for HP4 pumps. If in doubt, contact us with your VIN.
1VD Suction Control Valve – 294200-0693 294200-0693 Denso https://schema.org/VehiclePart Genuine Denso Suction Control Valve for Toyota LandCruiser 1VD-FTV. Restores stable rail pressure and smooth running; direct OEM fit. Toyota LandCruiser 70/200 Series (1VD-FTV) Common Rail Cowboys
View full details