Direction Plus
Everest Next-Gen Pre-filter with In Cab Alarm
Everest Next-Gen Pre-filter with In Cab Alarm
Taxes excluded. Shipping calculated at checkout.
Complete the install
Couldn't load pickup availability
Share
Ford Everest and Ranger Next-Gen | 2.0L and 3.0L V6 | Dual Battery Compatible
On a Next-Gen common rail, water in the fuel is not an if, it is a when. The PreLine-Plus sits ahead of the factory filter and gives the system a proper first line of defence, then tells you exactly when to drain.
The PL671DPK suits the Next-Gen Everest and Ranger on both the 2.0L and the BF2S 3.0L V6. Remote touring and towing raise the contamination risk. This is how you manage it.
What Is Included
- PreLine 150 filter assembly (PL150WSDP) with water sensor
- Vehicle-specific mounting bracket and hardware
- -6AN adaptors, push-lock and quick-release fittings, 3/8 inch EFI-rated fuel hose and stainless clamps
- Water alarm kit: wiring harness, in-cab warning light module, earth lead, add-a-fuse holder with 2A fuse, cable ties
Kit contents are set by Direction Plus and may change with component availability.
Key Features
- 100% water separation efficiency (Direction Plus figure, based on 150 to 300 micron droplet size)
- 98% particle separation (based on 30 micron particles)
- In-cab warning system, audible and visual alert when water is detected. No manual checking.
- Spin-on element for fast servicing with no mess
- Compatible with dual battery systems
Vehicle Fitment
- Ford Everest Next-Gen BF2S 3.0L V6, 2022 to 2026
- Ford Everest Next-Gen YN2S 2.0L 4cyl, 2022 to 2025
- Ford Everest YN25 2.0L 4cyl, 2026
- Ford Ranger Next-Gen BF2S 3.0L V6, 2022 to 2026
- Ford Ranger Next-Gen YN2S 2.0L 4cyl, 2022 to 2025
- Ford Ranger YN25 2.0L 4cyl, 2026
- Ford Ranger Super Duty BF2S 3.0L V6, 2026
Note: the Version 2 bracket, released by Direction Plus in November 2023, suits Touring and Premium Pack options with the auxiliary 6 switch pack (overhead switches). Direction Plus's description lists the Ranger Super Duty from 2025; its fitment table lists 2026 only.
Fitment per Direction Plus as of October 2026. Check the fitment guide or send us your VIN if unsure.
Fitting Notes
- Mounts in the passenger-side engine bay. On Version 2 installs the accessory fuse box is unclipped first.
- Use Loctite 567 or equivalent on threaded connections and make sure the quick-release fittings seat fully.
- The in-cab warning light needs a 20 mm hole. Prime through the bleed port and check for leaks before driving.
- Installation by a competent qualified mechanic is recommended.
Servicing
- Replace the element every 40,000 km or per your vehicle service schedule. Replacement: PL150DP.
- When the in-cab alarm activates, open the drain tap and release the water.
Shipping and Payment
- Free express shipping Australia-wide.
- Afterpay, Humm, Klarna and Zip available at checkout.
- Returns and warranty are handled under our refund policy.
Frequently Asked Questions
Q: Does it fit the 2.0L Everest as well as the V6?
A: Yes. Direction Plus lists the PL671DPK for the YN2S 2.0L (2022 to 2025), the YN25 2.0L (2026) and the BF2S 3.0L V6 (2022 to 2026).
Q: Will it work with a dual battery system?
A: Yes. Direction Plus lists it as compatible with dual battery systems.
Q: Does it fit Touring and Premium Pack models?
A: Yes, with the Version 2 bracket released in November 2023 for vehicles with the auxiliary 6 switch pack.
Q: How do I confirm it fits my vehicle?
A: Check the Direction Plus fitment guide or send us your VIN and we will confirm before you order.
Do Not Let Bad Fuel Kill Your Next-Gen
Direction Plus PreLine-Plus PL671DPK for the Next-Gen Everest and Ranger. In-cab water alert included. Free express shipping Australia-wide.
Common Rail Cowboys is not affiliated with Ford or Direction Plus. Direction Plus, PreLine and Loctite are trademarks of their respective owners. Installation by a competent person is recommended. Fitment is the buyer's responsibility: confirm against the Direction Plus fitment guide or send us your VIN before ordering. Water separation and particle separation figures are manufacturer specifications. Aftermarket modifications may affect vehicle warranty and compliance.
