Denso
Genuine Denso Injectors – Toyota LandCruiser 200 Series 1VD-FTV Pre-DPF | Set of 8 | 095000-9780
Genuine Denso Injectors – Toyota LandCruiser 200 Series 1VD-FTV Pre-DPF | Set of 8 | 095000-9780
Taxes included. Shipping calculated at checkout.
Couldn't load pickup availability
Genuine Denso Injectors – Toyota LandCruiser 200 Series 1VD-FTV (Pre-DPF / Non-DPF) | 095000-9780 | Set of 8
✅ New Genuine Denso | ✅ Full Set of 8 | ✅ Pre-DPF 1VD-FTV | ✅ Free Express Shipping AU-Wide
Brand new set of 8× Genuine Denso injectors (095000-9780) for the Toyota LandCruiser 200 Series VDJ200 fitted with the 1VD-FTV 4.5L V8 turbo-diesel engine (Non-DPF / Pre-DPF, 2007–2015). These are direct OEM replacements — same injectors Toyota fits at the factory — engineered for precise common rail fuel delivery, smooth idle, clean emissions, and long-term durability under tough Australian conditions.
Selling a complete set of 8 means one job done right — no mismatched flow rates, no partial replacement headaches.
🚗 Compatibility & Fitment
| Make | Toyota |
| Model | LandCruiser 200 Series (VDJ200) |
| Engine | 1VD-FTV 4.5L V8 Turbo-Diesel |
| Years | 2007–2015 (Pre-DPF / Non-DPF models) |
| Emission Spec | Non-DPF only — not for late DPF-equipped models |
| Quantity | Set of 8 (full engine set) |
| Condition | New Genuine OEM |
Not sure if your vehicle is Pre-DPF? Drop your VIN or Rego + State at checkout and we'll confirm before dispatch.
📦 Part Numbers – 095000-9780
| Denso Part Number | 095000-9780 |
| Toyota OEM Numbers | 23670-51020, 23670-59025, 23670-51030, 23670-59035, 23670-59036, 23670-51031, 23670-51037 |
All Toyota part numbers above are valid supersessions for the same genuine injector. If your invoice shows any of these, you're in the right place.
✅ What's Included
- 8× Genuine Denso injectors (095000-9780) — brand new, factory sealed
➕ Recommended Add-Ons to Complete the Job
- 1VD Injector Fitting Kit — copper seats, seals, line washers
- 1VD High-Pressure Injector Lines — replace lines at the same time to avoid comebacks
🛠️ Installation Overview
- Clean injector bores thoroughly; replace all copper seats and seals (don't reuse).
- Install injectors; torque clamps and high-pressure lines to Toyota OEM specification.
- Enter injector compensation (QR/trim) codes via diagnostic tool; perform idle and pilot learn.
- Verify commanded vs. actual rail pressure; inspect all unions for leaks under load.
Questions about the install? Message us — we know this engine inside out.
💡 Why Genuine Denso — Not Aftermarket
The 1VD-FTV runs exceptionally high rail pressure. Aftermarket injectors may flow differently from one another, causing rough idle, smoke, or premature failure. Genuine Denso injectors come with the correct compensation code assigned at manufacture, making calibration straightforward and ensuring matched flow across all 8 cylinders.
- OEM spray pattern and flow rate — smooth idle, clean combustion, lower EGTs
- Correct compensation code mapping — easier and more accurate calibration
- Built to withstand the sustained high rail pressure and heat of the V8 turbo-diesel
- Same injectors fitted by Toyota on the production line
💳 Payments & 🚚 Shipping
- Buy Now, Pay Later: Afterpay · Humm · Klarna · Zip
- Free Express Shipping — Australia-Wide
📦 Dispatch & Tracking
- Same or next business day dispatch when in stock
- Fully trackable — you'll receive tracking details by email
- Signature on delivery available on request
🌏 International Orders
We ship internationally. Message us before ordering for a freight quote.
⚠️ Stock & Lead Times
Generally in stock. During peak demand, allow 1–3 weeks. On a tight deadline? Message us before ordering and we'll give you an honest ETA.
Also need a 1VD fitting kit or injector lines? We stock everything to complete the job properly.
