NPC
NPC 650Nm Heavy Duty Clutch and Billet Flywheel Kit NPC8006-1B | Toyota Hilux N80 GUN126, Fortuner 1GD-FTV 2015-2018
NPC 650Nm Heavy Duty Clutch and Billet Flywheel Kit NPC8006-1B | Toyota Hilux N80 GUN126, Fortuner 1GD-FTV 2015-2018
(1)
Taxes included. Shipping calculated at checkout.
Couldn't load pickup availability
Share
NPC 650Nm Heavy Duty Organic Clutch and Billet Flywheel Kit
NPC8006-1B | Toyota Hilux N80 GUN125 / GUN126 / GUN136, Fortuner GUN156, 1GD-FTV 2015 to 2018
The N80's factory clutch and dual mass flywheel are the weak link the moment a 1GD gets a tune, and the DMF is a known failure on its own. NPC's Heavy Duty organic kit replaces both: a premium OE-quality cover and disc with the clamp lifted 20 to 40% over factory, on a dedicated NPC billet steel flywheel. NPC's maximum measured figure on the dyno is 650Nm at the wheels, with smooth engagement and, in most cases, no extra pedal effort.
Fitment
| Vehicle | Chassis | Engine | Build dates |
|---|---|---|---|
| Toyota Hilux N80 | GUN125 / GUN126 / GUN136 | 1GD-FTV 2.8L, manual | 2015 to 2018 |
| Toyota Fortuner | GUN156 | 1GD-FTV 2.8L, manual | 2015 to 2018 |
NPC list the 8006-1B for the GUN 1GD from 2015 to 2018. For a 2018 onwards facelift or a 2020 i-ART Hilux, message us with your build date before ordering and we will confirm the correct NPC kit.
NPC Specification
| Part number | NPC8006-1B kit code NPC8006STFW |
| Type | Heavy Duty organic |
| Clutch plate | 275mm organic |
| Flywheel | NPC billet steel, single mass, included. Replaces the factory dual mass flywheel |
| Maximum measured dyno figure at the wheels | 650Nm |
| Clamp | 20 to 40% above factory specification |
| Spigot bearing, aligning tool | Included |
Specification per NPC Performance Clutches, current at September 2026. Some resellers quote this kit at 750Nm; we use NPC's own measured number.
What's in the Box
- NPC Heavy Duty 275mm organic clutch disc
- NPC-modified high clamp pressure plate
- NPC billet steel flywheel, machined and ready to fit
- Release (throwout) bearing
- Spigot bearing
- Clutch aligning tool
- With Braided Bypass Line option: NPC braided clutch line, Hilux
Braided Clutch Line
The N80 has a hydraulic damper (accumulator) in the clutch line and it is a known failure point. Bypassing it with the NPC braided line removes fluid dampening and hose expansion, giving a more direct pedal and sharper engagement. NPC recommend it and so do we.
NPC note: removing the accumulator can introduce a slight pedal pulsation that the factory part normally damps. That is not a warranty item.
Fitting and Bed-In
- Fit to NPC's standard. Before fitting, trial the disc on the gearbox spline and check cover and release bearing height.
- The supplied billet flywheel comes machined and ready to fit. Fit the kit as a set.
- Inspect the fork, pivot, slave cylinder and rear main seal while the gearbox is out. See the genuine 1GD rear main seal kit.
- Bed in for 1,000 km of normal around-town driving. It is the gear changes that bed it in. No burnouts, flat changes or towing until then.
What to Expect
- Pedal: close to factory. NPC's Heavy Duty organic is built so the extra clamp comes with little or no extra pedal effort in most cases.
- Single mass flywheel: some setups show light gear rattle at idle where the dual mass used to damp it. Normal.
- Rated capacity assumes a healthy drivetrain, correct fitment and a sensible tune.
- NPC warranty excludes shudder, slip, pedal feel and harsh engagement on vehicles outside original specification, which includes tuned builds. Fit it properly and bed it in and you will not need it.
Shipping, Payment and Warranty
- Free express depot-to-depot shipping Australia wide. Heavy item, ships via depot freight. Home delivery available on request.
- Buy now, pay later. Afterpay, Humm, Klarna and Zip.
- 12 months or 20,000 km NPC warranty against faulty materials and workmanship, conditions apply. See our Refund, Returns and Warranty Policy.
- Usually dispatches same or next business day.
Frequently Asked Questions
Q: What is it rated to?
A: NPC's maximum measured dyno figure at the wheels is 650Nm. Some resellers quote 750Nm; we use NPC's own number.
Q: Does it replace the dual mass flywheel?
A: Yes. The NPC billet steel single mass flywheel is included, machined and ready to fit, plus release bearing, spigot bearing and aligning tool.
Q: Will the pedal be heavy?
A: No. NPC build the Heavy Duty organic for near-factory effort.
Q: Does it suit my 2019 or 2020 Hilux?
A: NPC list this kit to 2018. Send us your build date and we will confirm the right kit for a later N80.
Q: Do I need the braided line?
A: Recommended. It deletes the factory damper, which is a known failure point on the N80, for a more direct pedal.
Delete the Dual Mass. Keep the Pedal. Hold the Tune.
NPC8006-1B Heavy Duty clutch and billet flywheel for the N80 Hilux and Fortuner 1GD. Free express shipping Australia wide.
Disclaimer: Common Rail Cowboys is not affiliated with Toyota Motor Corporation. Installation by a qualified technician to NPC's standard. Fitment verification is the buyer's responsibility.
