Denso
Genuine Denso 4M41 Injectors 095000-7500 | Mitsubishi Pajero NT 3.2L 09/2008 On | Set of 4
Genuine Denso 4M41 Injectors 095000-7500 | Mitsubishi Pajero NT 3.2L 09/2008 On | Set of 4
Taxes included. Shipping calculated at checkout.
Couldn't load pickup availability
Genuine Denso 4M41 Injectors 095000-7500
Set of 4 | Mitsubishi Pajero NT 3.2L 4M41, 09/2008 On | Mitsubishi 1465A279
Brand new set of four genuine Denso 095000-7500 injectors, the factory injector for the 3.2L 4M41 in the Pajero NT from September 2008. Exact OEM replacement with the Denso compensation code on each injector. New, not exchange, not reconditioned.
Fitment
| Vehicle | Engine | Build dates | Injector |
|---|---|---|---|
| Mitsubishi Pajero NT | 4M41 3.2L DI-D | 09/2008 to 2011 | 095000-7500 (this set) |
| Mitsubishi Pajero NS, Triton ML | 4M41 3.2L | 2006 to 08/2008 | 095000-5760 (1465A054) |
| Mitsubishi Pajero NW, NX | 4M41 3.2L, DPF | 2011 on | 295050-0560 (1465A351) |
Quick check: the 4M41 changed injector three times, and the date ranges overlap at the changeovers. The number stamped on your existing injector is the source of truth. 095000-7500 means this set. The MN Triton from 2009 runs the 2.5L 4D56, not the 4M41.
Not sure? Add your VIN or State and Rego to the order notes and we will confirm before dispatch.
Part Numbers
| Denso | 095000-7500 also written 0950007500 |
| Mitsubishi | 1465A279 |
| Supplied as | Full engine set of 4, brand new, genuine Denso, compensation code on each injector |
What Else You Need for the Install
- 4M41 Injector and Rocker Cover Fitting Kit. Seat washers, injector seals and rocker cover gasket. Single-use parts.
Pro tip: never reuse the seat washers. A reused washer is the usual cause of injector rattle and blow-by on a fresh set.
Fitting and Coding Notes
- Enter each injector's compensation code into the ECU in the correct cylinder position with a suitable scan tool, then run the learn procedure.
- Clean the bores and seat faces, fit new seat washers, torque the clamp bolts to Mitsubishi specification.
- Clean-room practice. A single speck of grit in a common rail injector is enough to cause a misfire or a stuck needle.
- Installation by a qualified diesel technician recommended.
Want More Power?
For a tuned 4M41 we build the same genuine Denso body with an MCR +30% nozzle: Pajero NT 4M41 +30 Injectors. Tune required.
Stock and Lead Time
Generally in stock and shipping same or next business day. If we are between shipments, allow 1 to 2 weeks. On a deadline? Message us before ordering and we will confirm.
Shipping and Payment
- Free insured express shipping Australia wide. Full tracking included.
- Buy now, pay later. Afterpay, Humm, Klarna and Zip.
- International shipping available. Message us for a quote.
Warranty and Fitment Disclaimer
Full manufacturer's warranty applies when fitted and coded by a qualified diesel technician. See our Refund, Returns and Warranty Policy.
It is the customer's responsibility to verify fitment before installation. Rego and VIN checks confirm what the vehicle left the factory with, which may not be correct if the fuel system has been changed.
Frequently Asked Questions
Q: Are these genuine or aftermarket?
A: Genuine Denso 095000-7500, brand new. Not remanufactured, not exchange, not a copy.
Q: Which 4M41 injector do I have?
A: Read the number on the injector. 095000-5760 is the early NS Pajero and ML Triton, 095000-7500 is the NT Pajero, 295050-0560 is the DPF NW and NX Pajero. They do not interchange.
Q: Do I need to code them?
A: Yes. Each injector's compensation code must be entered into the ECU, followed by the learn procedure.
Q: Do they come with seat washers?
A: No. Order the 4M41 fitting kit alongside them.
Genuine Denso. Coded. Straight Back to Factory.
Set of 4 for the Pajero NT 3.2L 4M41 from 09/2008. Free express shipping Australia wide.
Disclaimer: Common Rail Cowboys is not affiliated with Mitsubishi Motors or Denso Corporation. Injectors should be fitted and coded by a competent diesel technician. Fitment verification is the buyer's responsibility.
