Skip to product information
1 of 4

Common Rail Cowboys

25 PSI Wastegate Actuator for F44 and F55 Turbos

25 PSI Wastegate Actuator for F44 and F55 Turbos

Regular price $91.80 AUD
Regular price Sale price $91.80 AUD
Sale Sold out

Taxes included. Shipping calculated at checkout.

Quantity
Ships Same or Next Business Day
Secure Checkout
VISA Pay Pay

25 PSI Wastegate Actuator – F44 & F55 Turbos

More Spool, More Boost | Suits 1KD & 4JJ1 Setups

25 PSI Spring Pressure Suits F44 & F55 Frames Sharper Spool & Torque Tune Dependent Afterpay, Humm, Klarna, Zip Free Express Shipping AU

Running a standard 15–18 PSI actuator on your F44 or F55? This 25 PSI wastegate actuator holds the gate shut harder for sharper low-RPM spool and more torque, lifting total boost to approximately 30 PSI (tune dependent).


Specifications
  • Mounting bolt centres: 34mm
  • Max open distance: 125mm
  • Minimum closed distance (shaft cut to suit): 85mm
  • Actuator diameter at widest point: 60mm
  • Actuator height: 56mm
  • Turbo side mounting pin: 7.5–8mm

Fitment Notes
  • Suits F44 and F55 frame turbos on 1KD and 4JJ1 applications – including the CRC F44, F46 and Greddy F55
  • Circlip not included
  • Shaft may need cutting to length for your setup

Confirm suitability for your turbo before purchasing using the dimensions above, and expect the tune to need adjusting to make proper use of the extra boost.


Shipping & Payment
  • Free Express Shipping Australia-Wide
  • Buy Now, Pay Later: Afterpay, Humm, Klarna & Zip

Frequently Asked Questions

Q: What does a stiffer actuator actually do?

A: It holds the wastegate closed harder and longer. That means faster spool, more midrange torque and a higher total boost ceiling – around 30 PSI tune dependent, versus 15–18 PSI on a standard actuator.

Q: Do I need a retune after fitting?

A: Yes, plan on it. The boost curve changes, and the tune should be adjusted to fuel and control it properly.

Q: Is the circlip included?

A: No – reuse your existing circlip or source one before install day.

Q: How do I know it fits my turbo?

A: Check the specs above against your current actuator (34mm bolt centres, 7.5–8mm mounting pin). Message us with photos if unsure.

Hold the Gate Shut, Wake the Turbo Up

25 PSI actuator for F44 and F55 turbos. Sharper spool, roughly 30 PSI total tune dependent. Free express shipping Australia-wide.

Disclaimer: Common Rail Cowboys products are intended for off-road / competition use. Raising boost requires adequate fuelling, monitoring and tune adjustment. Confirm dimensional suitability before purchase.

View full details